You are here:   Home  /  Specs for Specifiers  /  Spec MCC01: Anti-Slip Pavement System for Airside Walkways
* Product List * Colour Charts * Paint Calculator * My Basket quick_purchase
Spec MCC01: Anti-Slip Pavement System for Airside Walkways

pdfSpecification for a chemically resistant and mechanically durable anti-slip walkway coating Airside at Airports and high traffic locations.

Two pack polyurethane Paint Type - for application to concrete walkways from Planes to Terminal:

Specification: Temafloor 210 and Temadur 90 two pack polyurethane to meet particular circumstances, supplied by McConnells (www.mcc.ie) to provide a chemically resistant and mechanically durable walkway coating Airside or similar walkways: Manufactured by Tikkurila:

 

Quantity schedules to be prepared by McConnells:

Preparation, mixing and application to be carried out to the manufacturer’s written instructions and Data Sheets:

First coating: Temafloor 210 thinned 20% with A214 thinners and applied to achieve a dry film thickness of 100 microns.

Second coating: Temadur 90 thinned 10% with A213 thinners with the addition of Non Slip additive 300, and applied to achieve a dry film thickness of 50 microns.

Third coating: Temadur 90 without dilution, and applied to achieve a dry film thickness of 50 microns.

Certification to be completed by the Painting Contractor on the strict basis that the finalised paint quantities for this job/bill/contract per McConnells loading schedules have been applied for this specific contract.

Certification to be completed by McConnells, following receipt of the Painting Contractor’s certificate referred to above, on the strict basis that the finalised paint quantities for this job/bill/contract per McConnells loading schedules have been purchased for this job/bill/contract:

All of our products are available direct from McConnells and are sold subject to the Company’s Standard Conditions of Sale, published on www.mcc.ie

The Company and its employees are often asked on potential uses of McConnell’s products in addition to those described in the Company’s data sheets. Whilst in such cases the Company and its representatives will always try to offer helpful and constructive advice, the Company cannot be held responsible for the results of such uses unless they are specifically confirmed in writing by McConnells. The Customer/User must always test our product in their particular application to satisfy themselves that their requirement is fulfilled before proceeding with their project.

 

MY BASKET



Your Cart is currently empty.

Show Cart

SIGN UP TODAY
SPECIAL OFFERS
Special Offers
facebook_32twitter_32iso